tailgate
1. Weight: A.1 ton:195kgB. 1.5 ton:280kgC.2 ton:320kg
2. Power supply:12V/160AH,24V/120AH
3. Norma Dimension:
A. 1 ton: 1510mmx2000mm B.1.5 ton:1760mmx2000mm C.2
ton:1760mmx2300mm
width and hight of plateboard will vary according to customer
actual drawing, not limited to the above normal dimension.
4. Anti-collision facility: One iron-made buffer rod is available
5. We can make foot-step switch to enable the operator to hold the
goods tightly during operation.
6. Control box: all function are in integrated circuit control and
is very safe for operation.
7. Accessory:two rubber bumper,one hand wire control,two mounting
plates,two safety chains.
8.Normal capacity:1 MT,1.5 MT,2 MT.
9. Welding: by special aluminium welding machine
10. The thickness of board:40mm.
11. Hydraulic system: Haldex brand (imported from Sweden),hydraulic
system include gear pump,fuel tank,motor,sealing,valve and so on.
12. Diameter of cylinder: A.1ton: 65mm B.2ton: 81mm
13. Ground-touching wheel: made of iron.
14. Free of corrision
15. Cylinder:two sway cylinder, two lifting cylinder, one balance
cylinder.
16. Balance cylinder function:can adjust the tailgate to be
horizontal once started and no need to adjust it by operation. Also
it can sway certain degree to keep the tailgate unparalleled with
the truck to prevent the goods from slipping off when the truck
stand on a slope.
17. Lifting speed: 60-80mm/s, adjustable through flow-control
valve.
18.Valve: there are five valves:relief valve,check valve, reversing
valve,overflow valve and flow-control valve.
19.Hydraulic schematic and electrical schematicavailable
20.Installation and troubleshooting manual: available. This
detailed manual will advise you,in a very simple way, how to
install our tailgate and how to analyze and remove the failure by
yourself.Even a non-professional people will learn how to use and
repair it under
